Applications, specifications and model comparison
KRA5311FPCM — 53" 11-Drawer Double-Bank Heritage Series Roll Cab (Royal Blue). Configure or maintain the specified tool-storage or workstation system.
Applications and industries
Service workshops, assembly areas and maintenance stores are potential users with the matching storage or workstation equipment.
- Identify the cabinet, cart or workcenter model first.
- Then compare panel dimensions, mounting points and the stated series compatibility.
These industry examples are selection guidance, not additional manufacturer approvals.
Features of KRA5311FPCM
- 48" super wide drawer provides access to the most often used to tools
- 5-1/2" deep super wide drawer with two layer reinforced steel surface for loads up to 250 lb, and double ball bearing slides for smooth, strong operation
- Low vibration monoprene casters and muscular bottom case construction
- 14-gauge welded stiffener design, four corner gussets, and internally threaded weld nuts give this roll cab excess strength in motion
- Five 35-1/2" drawers wide enough to hold entire families of product
- Personalize with dozens of pliers in the 2" drawer, a large inventory of wrenches, pullers, taps/dies, power tools in the 4" drawers and diagnostic tools, large parts and cases in the bottom drawer
- Five narrow drawers on the right are great for organizing drive tools, bits, extensions, personal items and parts
- The bottom 12" deep drawer will hold the most bulky power tools and cases
Specifications and fit checks
- Depth, inches (mm): 20 (508)
- Drawer Banks: 2
- Width, inches (mm): 53 (1,346)
- Widest Drawer, inches (mm): 48 (1,219)
- No. of Drawers: 11
- No. of Shelves/Trays: 0/0
Cabinet series and size matter. Do not treat a similar panel, slide, cart or guard as a confirmed replacement without a model match.
Similar models to KRA5311FPCM
The table compares official catalogue details. These are selection options, not confirmed replacements. Check the differences against the task and existing equipment.
Model comparison using official catalogue data
| Compare |
KRA5311FPCM |
KRA5311FPC View product |
KRA5311FPBO View product |
| Official model description |
KRA5311FPCM — 53" 11-Drawer Double-Bank Heritage Series Roll Cab (Royal Blue) |
KRA5311FPC — 53" 11-Drawer Double-Bank Heritage Series Roll Cab (Gloss Black) |
KRA5311FPBO — 53" 11-Drawer Double-Bank Heritage Series Roll Cab (Red) |
| Depth, inches (mm) |
20 (508) |
20 (508) |
20 (508) |
| Drawer Banks |
2 |
2 |
2 |
| Width, inches (mm) |
53 (1,346) |
53 (1,346) |
53 (1,346) |
| Widest Drawer, inches (mm) |
48 (1,219) |
48 (1,219) |
48 (1,219) |
KRA5311FPCM selection checklist
For KRA5311FPCM, verify the required task, working range, interface dimensions and package contents against the official catalogue details. This final check helps prevent ordering a visually similar model with a different fit or capability.
Choosing KRA5311FPCM for the task
Begin with the equipment or tools that the storage product must accommodate. For a cabinet or chest, compare overall dimensions, compartment layout and the intended location. For a panel, slide, guard, foam insert or cover, identify the exact parent series first. A similar cabinet width does not establish matching attachment points or drawer geometry. Images can help identify the format, but they do not confirm every included accessory.
Next, consider the way the storage system will be used. A fixed workstation, a service cart and equipment carried between jobs have different access and handling needs. Check the published limits and supplied hardware for the selected configuration. Do not assume that tools shown in a storage image are included in the order. If the purchase replaces an existing component, record the cabinet model and the affected position. This makes a fit check more useful than a general request for a similar-looking part.
Planning the workshop application
Define the intended job in practical terms before comparing options. Record the equipment or component involved, the operation to perform and the access available around it. Include the current tool or accessory if this purchase replaces an existing item. That context helps distinguish a size change from a different product function. It also makes the application and industry examples above easier to assess against the actual work.
Understanding the catalogue record
The official listing identifies this model as 53" 11-Drawer Double-Bank Heritage Series Roll Cab (Royal Blue). Its catalogue grouping is Heritage Series Roll Cabs / KRA5311 Heritage Series Roll Cabs (53"). Use that description to identify the product format, then read the individual specifications for the details that matter to the job. A category describes where the product sits in the range; it is not an additional compatibility approval.
Further catalogue details
- Caster Size, inches: 6 x 2
- Height, inches (mm): 38-1/2 (978)
- Net Weight, lb (kg): 349 (158)
- Shipping Weight, lb (kg): 400 (181)
For this record, the available specification labels include Depth, inches (mm); Drawer Banks; Width, inches (mm). Read each value together with its label and unit. A drive size, external dimension and working range describe different things, even if their numbers look similar. If the job requires a value that is not listed, request that detail before ordering instead of estimating it from the photograph.
The catalogue country-of-origin field is USA. This field concerns the listed product origin; it does not identify local inventory, delivery time or the warranty terms of a Vietnam quotation. Confirm those commercial details separately.
Comparing options before ordering
The comparison above names KRA5311FPC and KRA5311FPBO. Review the displayed differences against the requirement for this job. Begin with function and compatibility, then compare access, configuration and included components. If the names differ by size, drive, colour or kit format, identify which difference matters before making a choice. Similar models are not automatic replacements, and a larger or more expensive option is not necessarily the better match.
Purchase questions and receiving checks
What should the order include?
Ask for a line-item description of the supplied configuration. For a set or kit, confirm the contents; for a component, confirm the quantity and the matching parent model where relevant. If photographs show a larger assembly or several items, do not assume all of them form part of this SKU. Keep any essential accessories and documents explicit in the quotation so that receiving checks can follow the same requirements.
Receiving, care and record keeping
On receipt, compare the item and its packaging with the ordered model, quantity and configuration. Check the supplied components and any requested documentation. Keep the product identification visible in the workshop’s inventory record. If the delivered item differs from the confirmed order, resolve that difference before assigning it to the planned job. This is especially useful when a range contains visually similar sizes or accessories for different parent tools.
For continued use, follow the manufacturer’s instructions for inspection, cleaning, storage and maintenance. Do not assume that a cleaning chemical, lubricant or maintenance method used on another tool is suitable here. Keep damaged or uncertain equipment out of the planned task until its condition is assessed. Record any replacement parts by model so future orders use the confirmed reference rather than a visual guess.
Ordering in Vietnam
Send Techmaster Vietnam the model number KRA5311FPCM and details of the task or existing equipment. Include any required sizes, connections and accessories.
Before ordering, confirm the quotation, lead time, package contents and applicable warranty terms. The official catalogue is the technical reference; it does not establish local stock or a Vietnam selling price.
For the source record, see the official Snap-on product listing. You can also browse the Vietnam product catalogue for related tools.
