Applications, specifications and model comparison
KRSC343PVC — 32" Six-Drawer Compact Split Lid Cart (White w/Titanium Trim). Configure or maintain the specified tool-storage or workstation system.
Applications and industries
Service workshops, assembly areas and maintenance stores are potential users with the matching storage or workstation equipment.
- Identify the cabinet, cart or workcenter model first.
- Then compare panel dimensions, mounting points and the stated series compatibility.
These industry examples are selection guidance, not additional manufacturer approvals.
Features of KRSC343PVC
- Cart body is entirely welded double wall design, not bolted, for lasting strength
- Almost 17,000 cubic inches of tool storage
- Lid surface is powder coated to match color of cart
- Surfaces slide independently on 120 lb capacity ball bearing drawer slides
- Extra-deep 7" top compartment
- Organize large sockets, use as a securable charging station for power tool batteries
- Designed to accommodate optional KAPS5 and cord wrap KAPS5BRKT
- Prybar/screwdriver storage area inside top compartment
- Full-length 2-point locking lid and separate manual rear lock rod for drawers; more secure than single-point lock used by many other manufacturers
- Independent drawer locking switch inside the top compartment
- Two shot-molded rubber/nylon corner bumpers help protect nearby objects and provide long-lasting brand identification and professional appearance
- Maneuverable 32" width and quiet, low-vibration rolling
- Rolled edges and a rear flange on drawers provide a solid feel to drawers under load
- Spot welds 3–4" apart
Specifications and fit checks
- Depth, inches (mm): 20 (508)
- Width, inches (mm): 32 (813)
- Height, inches (mm): 46 (1,168)
- Approx. Square inches (cm²): 3,533 (22,794)
- Cubic inches (cm³): 16,847 (276,073)
- Drawer Weight Capacity, lb (kg): 120 (54)
Cabinet series and size matter. Do not treat a similar panel, slide, cart or guard as a confirmed replacement without a model match.
Similar models to KRSC343PVC
The table compares official catalogue details. These are selection options, not confirmed replacements. Check the differences against the task and existing equipment.
Model comparison using official catalogue data
| Compare |
KRSC343PVC |
KRSC343PDC View product |
KRSC343PDO View product |
| Official model description |
KRSC343PVC — 32" Six-Drawer Compact Split Lid Cart (White w/Titanium Trim) |
KRSC343PDC — 32" Six-Drawer Compact Split Lid Cart (White w/Black Trim) |
KRSC343PDO — 32" Six-Drawer Compact Split Lid Cart (Ultra Yellow w/Black Trim) |
| Depth, inches (mm) |
20 (508) |
20 (508) |
20 (508) |
| Width, inches (mm) |
32 (813) |
32 (813) |
32 (813) |
| Height, inches (mm) |
46 (1,168) |
46 (1,168) |
46 (1,168) |
| Approx. Square inches (cm²) |
3,533 (22,794) |
3,533 (22,794) |
3,533 (22,794) |
KRSC343PVC selection checklist
For KRSC343PVC, verify the required task, working range, interface dimensions and package contents against the official catalogue details. This final check helps prevent ordering a visually similar model with a different fit or capability.
Choosing KRSC343PVC for the task
Begin with the equipment or tools that the storage product must accommodate. For a cabinet or chest, compare overall dimensions, compartment layout and the intended location. For a panel, slide, guard, foam insert or cover, identify the exact parent series first. A similar cabinet width does not establish matching attachment points or drawer geometry. Images can help identify the format, but they do not confirm every included accessory.
Next, consider the way the storage system will be used. A fixed workstation, a service cart and equipment carried between jobs have different access and handling needs. Check the published limits and supplied hardware for the selected configuration. Do not assume that tools shown in a storage image are included in the order. If the purchase replaces an existing component, record the cabinet model and the affected position. This makes a fit check more useful than a general request for a similar-looking part.
Planning the workshop application
Define the intended job in practical terms before comparing options. Record the equipment or component involved, the operation to perform and the access available around it. Include the current tool or accessory if this purchase replaces an existing item. That context helps distinguish a size change from a different product function. It also makes the application and industry examples above easier to assess against the actual work.
Understanding the catalogue record
The official listing identifies this model as 32" Six-Drawer Compact Split Lid Cart (White w/Titanium Trim). Its catalogue grouping is Roll Carts / KRSC343 Series 32" Sliding-Top Roll Carts. Use that description to identify the product format, then read the individual specifications for the details that matter to the job. A category describes where the product sits in the range; it is not an additional compatibility approval.
For this record, the available specification labels include Depth, inches (mm); Width, inches (mm); Height, inches (mm). Read each value together with its label and unit. A drive size, external dimension and working range describe different things, even if their numbers look similar. If the job requires a value that is not listed, request that detail before ordering instead of estimating it from the photograph.
The catalogue country-of-origin field is USA. This field concerns the listed product origin; it does not identify local inventory, delivery time or the warranty terms of a Vietnam quotation. Confirm those commercial details separately.
Comparing options before ordering
The comparison above names KRSC343PDC and KRSC343PDO. Review the displayed differences against the requirement for this job. Begin with function and compatibility, then compare access, configuration and included components. If the names differ by size, drive, colour or kit format, identify which difference matters before making a choice. Similar models are not automatic replacements, and a larger or more expensive option is not necessarily the better match.
Purchase questions and receiving checks
What should the order include?
Ask for a line-item description of the supplied configuration. For a set or kit, confirm the contents; for a component, confirm the quantity and the matching parent model where relevant. If photographs show a larger assembly or several items, do not assume all of them form part of this SKU. Keep any essential accessories and documents explicit in the quotation so that receiving checks can follow the same requirements.
Receiving, care and record keeping
On receipt, compare the item and its packaging with the ordered model, quantity and configuration. Check the supplied components and any requested documentation. Keep the product identification visible in the workshop’s inventory record. If the delivered item differs from the confirmed order, resolve that difference before assigning it to the planned job. This is especially useful when a range contains visually similar sizes or accessories for different parent tools.
For continued use, follow the manufacturer’s instructions for inspection, cleaning, storage and maintenance. Do not assume that a cleaning chemical, lubricant or maintenance method used on another tool is suitable here. Keep damaged or uncertain equipment out of the planned task until its condition is assessed. Record any replacement parts by model so future orders use the confirmed reference rather than a visual guess.
Ordering in Vietnam
Send Techmaster Vietnam the model number KRSC343PVC and details of the task or existing equipment. Include any required sizes, connections and accessories.
Before ordering, confirm the quotation, lead time, package contents and applicable warranty terms. The official catalogue is the technical reference; it does not establish local stock or a Vietnam selling price.
For the source record, see the official Snap-on product listing. You can also browse the Vietnam product catalogue for related tools.
