40″ Sliding Lid Eight-Drawer Bed Liner Shop Cart (Storm Gray w/Black Trim)

KRSC430APWZ7 — 40" Sliding Lid Eight-Drawer Bed Liner Shop Cart (Storm Gray w/Black Trim). Configure or maintain the specified tool-storage or workstation system.

Applications and industries

Service workshops, assembly areas and maintenance stores are potential users with the matching storage or workstation equipment.

• Identify the cabinet, cart or workcenter model first.
• Then compare panel dimensions, mounting points and the stated series compatibility.

These industry examples are selection guidance, not additional manufacturer approvals.

Features of KRSC430APWZ7

Primary official feature details

• Features a split top that slides out from the center to provide total access to a generous 7" deep top compartment
• Cart body is entirely welded double wall design, not bolted, for lasting strength
• Two extra sliding drawers located under the sliding lid provide excellent working access to parts and work materials
• 4" SpeeDrawer included for small parts organization
• Rolled edges and a rear flange on drawers provide a solid feel to drawers under load
• Two shot-molded rubber/nylon corner bumpers on each corner help protect vehicles and shop equipment
• Full-length two point locking lid and separate manual rear lock rod for drawers
• A massive 8" deep bottom drawer is 35" wide will hold large bulky items
• Organize large sockets, use as a securable charging station for power tool batteries—designed to accommodate optional KAPS5 power strip
• The dual work surfaces are embossed inward around the edges to help keep tools and parts from rolling off
• Top compartment is pre-punched for power strip (KAPS5)

Additional official feature details

• More than 5" of depth beneath sliding drawers in top compartment—plenty of room for chargers and vertical socket storage
• Choose stainless steel or black bed liner coated work surface

Specifications and fit checks

• Depth, inches (cm): 20 (51)
• Width, inches (mm): 40-1/2 (1,029)
• Lid Drawer Height (Clearance), inches (cm): 2-1/8 (53.8)
• Lid Drawer Width, inches (cm): 18 (46)
• Caster Size, inches: 6 x 2
• Net Weight, lb (kg): 262 (112)

Cabinet series and size matter. Do not treat a similar panel, slide, cart or guard as a confirmed replacement without a model match.

Similar models to KRSC430APWZ7

The table compares official catalogue details. These are selection options, not confirmed replacements. Check the differences against the task and existing equipment.

KRSC430APWZ7 selection checklist

For KRSC430APWZ7, verify the required task, working range, interface dimensions and package contents against the official catalogue details. This final check helps prevent ordering a visually similar model with a different fit or capability.

Choosing KRSC430APWZ7 for the task

Begin with the equipment or tools that the storage product must accommodate. For a cabinet or chest, compare overall dimensions, compartment layout and the intended location. For a panel, slide, guard, foam insert or cover, identify the exact parent series first. A similar cabinet width does not establish matching attachment points or drawer geometry. Images can help identify the format, but they do not confirm every included accessory.

Next, consider the way the storage system will be used. A fixed workstation, a service cart and equipment carried between jobs have different access and handling needs. Check the published limits and supplied hardware for the selected configuration. Do not assume that tools shown in a storage image are included in the order. If the purchase replaces an existing component, record the cabinet model and the affected position. This makes a fit check more useful than a general request for a similar-looking part.

Planning the workshop application

Define the intended job in practical terms before comparing options. Record the equipment or component involved, the operation to perform and the access available around it. Include the current tool or accessory if this purchase replaces an existing item. That context helps distinguish a size change from a different product function. It also makes the application and industry examples above easier to assess against the actual work.

Understanding the catalogue record

The official listing identifies this model as 40" Sliding Lid Eight-Drawer Bed Liner Shop Cart (Storm Gray w/Black Trim). Its catalogue grouping is Roll Carts / KRSC430A Series 40" Sliding-Top Roll Carts. Use that description to identify the product format, then read the individual specifications for the details that matter to the job. A category describes where the product sits in the range; it is not an additional compatibility approval.

Further catalogue details

• Height, inches (cm): 46 (117)
• Drawers: 8 (including 2 under lid)
• Shipping Weight, lb (kg): 312 (135)
• Top Compartment Depth, inches (cm): 7-1/4 (18)

For this record, the available specification labels include Depth, inches (cm); Width, inches (mm); Lid Drawer Height (Clearance), inches (cm). Read each value together with its label and unit. A drive size, external dimension and working range describe different things, even if their numbers look similar. If the job requires a value that is not listed, request that detail before ordering instead of estimating it from the photograph.

The catalogue country-of-origin field is USA. This field concerns the listed product origin; it does not identify local inventory, delivery time or the warranty terms of a Vietnam quotation. Confirm those commercial details separately.

Comparing options before ordering

The comparison above names KRSC430ABET7 and KRSC430APC7. Review the displayed differences against the requirement for this job. Begin with function and compatibility, then compare access, configuration and included components. If the names differ by size, drive, colour or kit format, identify which difference matters before making a choice. Similar models are not automatic replacements, and a larger or more expensive option is not necessarily the better match.

Purchase questions and receiving checks

What should the order include?

Ask for a line-item description of the supplied configuration. For a set or kit, confirm the contents; for a component, confirm the quantity and the matching parent model where relevant. If photographs show a larger assembly or several items, do not assume all of them form part of this SKU. Keep any essential accessories and documents explicit in the quotation so that receiving checks can follow the same requirements.

Receiving, care and record keeping

On receipt, compare the item and its packaging with the ordered model, quantity and configuration. Check the supplied components and any requested documentation. Keep the product identification visible in the workshop’s inventory record. If the delivered item differs from the confirmed order, resolve that difference before assigning it to the planned job. This is especially useful when a range contains visually similar sizes or accessories for different parent tools.

For continued use, follow the manufacturer’s instructions for inspection, cleaning, storage and maintenance. Do not assume that a cleaning chemical, lubricant or maintenance method used on another tool is suitable here. Keep damaged or uncertain equipment out of the planned task until its condition is assessed. Record any replacement parts by model so future orders use the confirmed reference rather than a visual guess.

Ordering in Vietnam

Send Techmaster Vietnam the model number KRSC430APWZ7 and details of the task or existing equipment. Include any required sizes, connections and accessories.

Before ordering, confirm the quotation, lead time, package contents and applicable warranty terms. The official catalogue is the technical reference; it does not establish local stock or a Vietnam selling price.

For the source record, see the official Snap-on product listing. You can also browse the Vietnam product catalogue for related tools.