Multi-Probe Ultra

EECT900 — Multi-Probe Ultra. Support the stated inspection, diagnostic or measurement workflow.

Applications and industries

Automotive diagnostics, equipment troubleshooting and industrial maintenance are potential settings within the product’s stated application.

• Identify the equipment, measured condition and required range or interface.
• Then compare the accessory, instrument or consumable with the complete diagnostic procedure.

These industry examples are selection guidance, not additional manufacturer approvals.

Features of EECT900

• Capability
• Tests AC and DC voltage, resistance (ohms), and amperage in vehicle applications
• Patented circuit breaker-protected power-up of components to determine function
• Built-in vehicle battery status check provides information to the technician before proceeding with circuit diagnosis (may need to charge the battery)
• Accessibility
• Ergonomic hand-hold position and large rear-facing color LCD display lets the user get in tight spaces and still read the live results on the screen
• Convenient 23′ cable allows the user to connect to the vehicle battery and move around the vehicle, including trucks, to check distant circuits like brake lights or trailer terminal connections
• Provides audible smart-tones to indicate tip readings, warning sounds and more
• Simplicity
• Navigation is simplified via a color-coded menu—five menu selections are identified with a unique color so the user recalls the mode in use: Purple = AC Voltage, Orange = DC Voltage, Yellow = Amperage, White = Ohms
• Single-function buttons are used for up and down scrolling, clear, menu/mode toggle, mute, light on/off and +/- powering of a circuit
• Inclusive AC meter displays all measurements simultaneously—Peak to Peak, Pulse Width, Duty Cycle, Frequency and TRMS
• 23′ cable is field replaceable and calibrated—saves the time of sending a complete unit in for repair if just the cable fails
• 18 month warranty
• Technical Support: 888-549-0566

Specifications and fit checks

• DC Measurement Range, Volts: .5–200
• Amp Measurement Range, Amps: .5–50
• Min Storage Temperature: -4 °F (-20 °C)
• Patent Number: 7154899
• Max. Intermittent Load, Amps/30 Seconds: 29
• Replacement Fuses: EECT900-4

An accessory or consumable is not a complete diagnostic system. Verify range, calibration needs, parent-equipment compatibility and the official procedure.

Similar models to EECT900

The table compares official catalogue details. These are selection options, not confirmed replacements. Check the differences against the task and existing equipment.

EECT900 selection checklist

For EECT900, verify the required task, working range, interface dimensions and package contents against the official catalogue details. This final check helps prevent ordering a visually similar model with a different fit or capability.

Choosing EECT900 for the task

Identify the parent tool, machine or assembly before selecting a service component. A spring, screw, spacer, shaft, adaptor or other small part may have a simple name but a very specific role. The connection, dimensions and equipment revision can all matter. Start with the service documentation and the model number, then compare the official part reference. Do not use a general visual resemblance as the only basis for substitution.

For a missing or worn component, record where it belongs and which other parts it contacts. Photographs and measurements can support the inquiry, but they do not replace the maker’s fit information. If the source record is limited, keep the unresolved dimensions or compatibility questions open until they are confirmed. An accessory is not a complete service system unless the catalogue describes it that way. Likewise, a component from a related set is not automatically interchangeable. Keep the confirmed replacement reference with the equipment’s maintenance record.

Planning the workshop application

Define the intended job in practical terms before comparing options. Record the equipment or component involved, the operation to perform and the access available around it. Include the current tool or accessory if this purchase replaces an existing item. That context helps distinguish a size change from a different product function. It also makes the application and industry examples above easier to assess against the actual work.

Understanding the catalogue record

The official listing identifies this model as Multi-Probe Ultra. Its catalogue grouping is Circuit Testers / Digital Display Circuit Testers. Use that description to identify the product format, then read the individual specifications for the details that matter to the job. A category describes where the product sits in the range; it is not an additional compatibility approval.

Further catalogue details

• Special Tests: Batt Stat, Hot Shot
• Display Size, inches: 2.4
• CE Approved: Yes
• AC Measurement P-P, Volts: 200

For this record, the available specification labels include DC Measurement Range, Volts; Amp Measurement Range, Amps; Patent Number. Read each value together with its label and unit. A drive size, external dimension and working range describe different things, even if their numbers look similar. If the job requires a value that is not listed, request that detail before ordering instead of estimating it from the photograph.

The catalogue country-of-origin field is TWN. This field concerns the listed product origin; it does not identify local inventory, delivery time or the warranty terms of a Vietnam quotation. Confirm those commercial details separately.

Comparing options before ordering

The comparison above names EECT900-5 and EECTCORD424V. Review the displayed differences against the requirement for this job. Begin with function and compatibility, then compare access, configuration and included components. If the names differ by size, drive, colour or kit format, identify which difference matters before making a choice. Similar models are not automatic replacements, and a larger or more expensive option is not necessarily the better match.

Purchase questions and receiving checks

What should the order include?

Ask for a line-item description of the supplied configuration. For a set or kit, confirm the contents; for a component, confirm the quantity and the matching parent model where relevant. If photographs show a larger assembly or several items, do not assume all of them form part of this SKU. Keep any essential accessories and documents explicit in the quotation so that receiving checks can follow the same requirements.

Receiving, care and record keeping

On receipt, compare the item and its packaging with the ordered model, quantity and configuration. Check the supplied components and any requested documentation. Keep the product identification visible in the workshop’s inventory record. If the delivered item differs from the confirmed order, resolve that difference before assigning it to the planned job. This is especially useful when a range contains visually similar sizes or accessories for different parent tools.

For continued use, follow the manufacturer’s instructions for inspection, cleaning, storage and maintenance. Do not assume that a cleaning chemical, lubricant or maintenance method used on another tool is suitable here. Keep damaged or uncertain equipment out of the planned task until its condition is assessed. Record any replacement parts by model so future orders use the confirmed reference rather than a visual guess.

Ordering in Vietnam

Send Techmaster Vietnam the model number EECT900 and details of the task or existing equipment. Include any required sizes, connections and accessories.

Before ordering, confirm the quotation, lead time, package contents and applicable warranty terms. The official catalogue is the technical reference; it does not establish local stock or a Vietnam selling price.

For the source record, see the official Snap-on product listing. You can also browse the Vietnam product catalogue for related tools.