SideKIQ™ EPIQ™ Series Flip-Top RollCart (Midnight Blue)

KEMN361B1PDG — SideKIQ™ EPIQ™ Series Flip-Top RollCart (Midnight Blue). Configure or maintain the specified tool-storage system.

Applications and industries

Service workshops, assembly areas and maintenance stores are potential users with the matching storage equipment.

• Identify the cabinet, cart or workcenter model first.
• Then compare panel dimensions, mounting points and the stated series compatibility.

These industry examples are selection guidance, not additional manufacturer approvals.

Features of KEMN361B1PDG

• Super capacity in a maneuverable footprint—37" wide and 30" deep
• Same 48" height as the EPIQ™ Roll Cab
• Deep 8" top compartment is massive compared to everything else out there—for large prybars, chargers, diagnostics, etc.
• ISO-Ride+™ swivel lock mag wheels with compression puck suspension for a smooth ride over rough surfaces
• InPulse™ Drawer Action: Flush finish drawers with uncompromising strength are easier to open, easier to close and don’t drift open
• (6) heavy-duty drawers hold 227 lb per drawer
• Casters are designed to carry 2,000 lb—each will provide a lifetime of rugged use
• Lid styling and height blend with any EPIQ™ Roll Cab
• Radiused trim and inset drawers—no sharp corners

Specifications and fit checks

• Drawer Dim., [Qty] inches (mm): [2 Drawers] 30-1/16 W x 27-1/2 D x 1-11/16 H (764 W x 700 D x 43 H); [3 Drawers] 30-1/16 W x 27-1/2 D x 4 H (764 W x 700 D x 101 H); [1 Drawer] 30-1/16 W x 27-1/2 D x 6-3/16 H (764 W x 700 D x 157 H)
• Depth, inches (mm): 30 (762)
• Width, inches (mm): 37 (940)
• Work Surface: Stainless Steel
• Height, inches (mm): 48-3/8 (1,229)
• Net Weight, lb (kg): 498 (227)

Cabinet series and size matter. Do not treat a similar panel, slide or guard as a confirmed replacement without a model match.

Similar models to KEMN361B1PDG

The table compares official catalogue details. These are selection options, not confirmed replacements. Check the differences against the task and existing equipment.

KEMN361B1PDG selection checklist

For KEMN361B1PDG, verify the required task, working range, interface dimensions and package contents against the official catalogue details. This final check helps prevent ordering a visually similar model with a different fit or capability.

Choosing KEMN361B1PDG for the task

Begin with the equipment or tools that the storage product must accommodate. For a cabinet or chest, compare overall dimensions, compartment layout and the intended location. For a panel, slide, guard, foam insert or cover, identify the exact parent series first. A similar cabinet width does not establish matching attachment points or drawer geometry. Images can help identify the format, but they do not confirm every included accessory.

Next, consider the way the storage system will be used. A fixed workstation, a service cart and equipment carried between jobs have different access and handling needs. Check the published limits and supplied hardware for the selected configuration. Do not assume that tools shown in a storage image are included in the order. If the purchase replaces an existing component, record the cabinet model and the affected position. This makes a fit check more useful than a general request for a similar-looking part.

Planning the workshop application

Define the intended job in practical terms before comparing options. Record the equipment or component involved, the operation to perform and the access available around it. Include the current tool or accessory if this purchase replaces an existing item. That context helps distinguish a size change from a different product function. It also makes the application and industry examples above easier to assess against the actual work.

Understanding the catalogue record

The official listing identifies this model as SideKIQ™ EPIQ™ Series Flip-Top RollCart (Midnight Blue). Its catalogue grouping is Roll Carts / KEMN361 SideKIQ™ EPIQ™ Series Flip-Top Roll Carts. Use that description to identify the product format, then read the individual specifications for the details that matter to the job. A category describes where the product sits in the range; it is not an additional compatibility approval.

Further catalogue details

• Load Capacity, lb (kg): 2,000 (907)
• Top Compartment Dimensions, inches (mm): 36 W x 29 D x 8 H (914 W x 717 D x 203 H)
• Cubic inches (cm³): 26,125 (428,112)
• Square inches (cm²): 6,027 (38,884)

For this record, the available specification labels include Drawer Dim., [Qty] inches (mm); Depth, inches (mm); Width, inches (mm). Read each value together with its label and unit. A drive size, external dimension and working range describe different things, even if their numbers look similar. If the job requires a value that is not listed, request that detail before ordering instead of estimating it from the photograph.

The catalogue country-of-origin field is USA. This field concerns the listed product origin; it does not identify local inventory, delivery time or the warranty terms of a Vietnam quotation. Confirm those commercial details separately.

Comparing options before ordering

The comparison above names KEMN361B1PC and KEMN361B1PCM. Review the displayed differences against the requirement for this job. Begin with function and compatibility, then compare access, configuration and included components. If the names differ by size, drive, colour or kit format, identify which difference matters before making a choice. Similar models are not automatic replacements, and a larger or more expensive option is not necessarily the better match.

Purchase questions and receiving checks

What should the order include?

Ask for a line-item description of the supplied configuration. For a set or kit, confirm the contents; for a component, confirm the quantity and the matching parent model where relevant. If photographs show a larger assembly or several items, do not assume all of them form part of this SKU. Keep any essential accessories and documents explicit in the quotation so that receiving checks can follow the same requirements.

Receiving, care and record keeping

On receipt, compare the item and its packaging with the ordered model, quantity and configuration. Check the supplied components and any requested documentation. Keep the product identification visible in the workshop’s inventory record. If the delivered item differs from the confirmed order, resolve that difference before assigning it to the planned job. This is especially useful when a range contains visually similar sizes or accessories for different parent tools.

For continued use, follow the manufacturer’s instructions for inspection, cleaning, storage and maintenance. Do not assume that a cleaning chemical, lubricant or maintenance method used on another tool is suitable here. Keep damaged or uncertain equipment out of the planned task until its condition is assessed. Record any replacement parts by model so future orders use the confirmed reference rather than a visual guess.

Ordering in Vietnam

Send Techmaster Vietnam the model number KEMN361B1PDG and details of the task or existing equipment. Include any required sizes, connections and accessories.

Before ordering, confirm the quotation, lead time, package contents and applicable warranty terms. The official catalogue is the technical reference; it does not establish local stock or a Vietnam selling price.

For the source record, see the official Snap-on product listing. You can also browse the Vietnam product catalogue for related tools.