Long Handle Driver

Official catalogue country of origin: USA.

A1310B17 — Long Handle Driver. Support installation or removal of a compatible seal or bushing.

Applications and industries

The manufacturer lists these application details:

• Valuable tool able to assist with multiple tasks, working in restricted access areas where a shorter handle can’t be struck or won’t do the job because it can’t reach

Vehicle repair, machinery service and maintenance workshops are potential users with matching components.

• Match the contact diameter and profile to the component.
• Next, check the handle, adaptor or drive connection required by the service set.

These industry examples are selection guidance, not additional manufacturer approvals.

Features of A1310B17

• Driver works in tandem with Snap-on® A1310B- and A1310SB-series bearing and seal drivers. Also compatible with most Snap-on®, A157 and A257 bushing drivers, A160M, and A261M metric bushing drivers, as well as with all BJP1 Ball Joint Press Cups by use of the A1310SB-BJP1 adaptor
• Driver handle features a broad steel striking cap that protects your hand from off-center strikes
• Driver retains the disks without a fastener, making it quicker to setup and no screw to lose or break
• The additional length allows access in places other drivers cannot reach
• 16-1/2" (10" exposed) bar length

Specifications and fit checks

• Dimension A, Length, inches: 16-1/2
• Size/Diameter: 16-1/2" L
• Dimension B, Exposed Bar Length, inches: 10

Different disk diameters are not interchangeable by default. Verify where the tool contacts the seal or bushing and follow the service procedure.

Similar models to A1310B17

The table compares the listed model details. These are selection options, not confirmed replacements. Check the differences against your task and existing equipment.

Choosing A1310B17 for the task

A seal or bushing driver needs the correct contact geometry for the component. Compare the stated diameter, profile and connection to the handle or press arrangement. A disk, handle and complete driver set are different purchasing options. Start with the component dimensions and the required service method before deciding which of them is needed.

Next, check where the tool is intended to contact the part and whether the surrounding assembly permits the required access. A nearby nominal diameter does not automatically provide a suitable installation surface. For a replacement disk or adaptor, identify the existing driver system and the exact model reference. Do not infer compatibility with every press or striking handle. Follow the component and tool manufacturers’ procedures for the actual installation. Keep any unresolved fit question in the quotation request instead of assuming a part from a related set will work.

Planning the workshop application

Define the intended job in practical terms before comparing options. Record the equipment or component involved, the operation to perform and the access available around it. Include the current tool or accessory if this purchase replaces an existing item. That context helps distinguish a size change from a different product function. It also makes the application and industry examples above easier to assess against the actual work.

Understanding the catalogue record

The official listing identifies this model as Long Handle Driver. Its catalogue grouping is Driver Sets / Bearing Race and Seal Drivers. Use that description to identify the product format, then read the individual specifications for the details that matter to the job. A category describes where the product sits in the range; it is not an additional compatibility approval.

For this record, the available specification labels include Dimension A, Length, inches; Size/Diameter; Dimension B, Exposed Bar Length, inches. Read each value together with its label and unit. A drive size, external dimension and working range describe different things, even if their numbers look similar. If the job requires a value that is not listed, request that detail before ordering instead of estimating it from the photograph.

The catalogue country-of-origin field is USA. This field concerns the listed product origin; it does not identify local inventory, delivery time or the warranty terms of a Vietnam quotation. Confirm those commercial details separately.

Comparing options before ordering

The comparison above names A1310B-1 and A1310B-2. Review the displayed differences against the requirement for this job. Begin with function and compatibility, then compare access, configuration and included components. If the names differ by size, drive, colour or kit format, identify which difference matters before making a choice. Similar models are not automatic replacements, and a larger or more expensive option is not necessarily the better match.

Purchase questions and receiving checks

What should the order include?

Ask for a line-item description of the supplied configuration. For a set or kit, confirm the contents; for a component, confirm the quantity and the matching parent model where relevant. If photographs show a larger assembly or several items, do not assume all of them form part of this SKU. Keep any essential accessories and documents explicit in the quotation so that receiving checks can follow the same requirements.

Receiving, care and record keeping

On receipt, compare the item and its packaging with the ordered model, quantity and configuration. Check the supplied components and any requested documentation. Keep the product identification visible in the workshop’s inventory record. If the delivered item differs from the confirmed order, resolve that difference before assigning it to the planned job. This is especially useful when a range contains visually similar sizes or accessories for different parent tools.

For continued use, follow the manufacturer’s instructions for inspection, cleaning, storage and maintenance. Do not assume that a cleaning chemical, lubricant or maintenance method used on another tool is suitable here. Keep damaged or uncertain equipment out of the planned task until its condition is assessed. Record any replacement parts by model so future orders use the confirmed reference rather than a visual guess.

Ordering in Vietnam

Send Techmaster Vietnam the model number A1310B17 and details of your task or existing equipment. Include any required sizes, connections and accessories. This helps identify the correct configuration.

Before ordering, confirm the quotation, lead time, package contents and applicable warranty terms. The official catalogue is the technical reference; it does not establish local stock or a Vietnam selling price.

For the source record, see the official Snap-on product listing. You can also browse the Vietnam product catalogue for related tools.